Here you can select what part of the system you want to watch or change. What port do you have gui listen on. Lets say port 12838. Now i wan to forward port 443, 80 (and in future some more) to servers in our network. But it still doesn't work. Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition! This computer may be directly connected with a network cable or connected to the same switch as the LAN interface of the firewall. 443/tcp open https. pfSense: Static Port für VoIP konfigurieren - Andy's Blog Step 5 – Forward port 8080 to your WAN interface address. The best way to handle this is to create an OpenVPN server on PFSense and point your FQDN at that. I've set the range for the LAN to 192.168.2.1 - 192.168.2.85 with DHCP enabled and the bit count at 24 and I didn't enter a new IPv6 address. 22, 443) freizuschalten, so reicht das bei OPNsense allein nicht. To open the NAT, the first thing we have to do is go to the “Firewall / NAT” section, and in the “Port forward” tab create a new rule. ; The next step will be to assign the interfaces the proper IP configuration. Managing PFSense is done via a web interface which is generally accessed via the internal or LAN interface. Do not activate the WEB Interface on the WAN side of our router. Interface On the rules page, select your network interface (In my case WAN) and press the Add button as shown in the screenshot below. At least 3 network ports, OR a PCI NIC card with at least 2 additional ethernet ports. Pfsense